Laminar Flow Unit

We make available our Laminar Flow Unit are manufactured using high quality Stainless Steel 304/316/oven baked epoxy powder coated galvanized sheet metal that assures high durability and optimum functional life. Further, we make our Laminar Flow Unit available at very economical price.

Specifications

Laminar Airflow Velocity	Average of 0.45m/s or 90fpm measured 150mm/6 inches from filter face for 40 air changes/ minute
Standard Compliance	Individually performance tested and certified at factory under controlled condition for
Air Cleanliness Within Working Area	ISO 14644.1 Class 4, US Federal Standard 209E Class 10/ M2.5 AS 1386 class 2.5, JIS B9920 class 4, BS5295 Class D, Class M100,000 as per KS 27030.1 and other equipment cleanliness classification of the VDI 2083 and AFNOR X44101.
Main Filter Type	HEPA/ULPA filter with integral metal guards and filter frame gaskets: fully compliant with EN1822 and IEST-RP-CC001.3 requirements.
Main Filter Efficiency Ratings	99.9995%/99.997%/99.97% down to 0.3µ
Pre Filter	Disposable and non washable polyester fibers with 85% arrestance/ EU3 rated
Noise Level	Typical <64 dba at initial blower speed setting measured as per IEST-RP-CC002.2(figure based on 4 feet cabinet, subject to acoustic properties of test environment)
Light Intensity	>1100 lux / >102 foot candles, measured at work surface level (zero background) as per IEST-RP-CC002.2
Main Body Construction	Stainless Steel 304/316/oven baked epoxy powder coated galvanized sheet metal
Side Window Construction	Colourless and transparent UV-absorbing 5-6mm/0.2"-0.24" tempered glass
Work Surface Construction	1.2mmt/0.05"/18 gauge stainless steel grade 304